Electrical Cable-Ladder and Fitting Drawings

This page compiles electrical cable-ladder and fitting drawings used by The Sun for consultation, specification coordination and project manufacturing. Engineers can refer to straight-ladder construction, joint-hole patterns, horizontal and vertical bends, tees, crosses and reducers.

Check drawing dimensions against width W, height H, straight-section length, bend radius, material thickness, cable load and support spacing for each project. When ordering, provide route drawings or a bill of quantities so The Sun can verify compatibility between straight ladders and fittings.

Electrical Cable-Ladder and Fitting Drawings

We provide detailed drawings so engineers can integrate them into project designs:

• Download PDF/Catalogue: Download detailed cable-ladder catalogue (PDF)
• Download CAD file: Being updated

Straight Cable-Ladder Drawings and Joint-Hole Types

Note: The default joint-hole type at The Sun is Type 1 (for heights < 150 mm). Please specify joint-hole types 2, 3 or 4 when placing a special order.

Cable-Ladder Fitting Drawings (Bends, Tees and Crosses)

Note: Unless otherwise requested, The Sun manufactures bends, tees and crosses in the standard configuration (the best-looking configuration)

How to Read Product Codes and Order Quickly from The Sun

For a fast and accurate quotation, provide information in the standard format. We offer free quantity take-offs and advice on the optimal solution.

Straight cable-ladder ordering code

Product code: TC-WxHxT-N-LN-XXX

Where:

• W: Width (mm)

• H: Height (mm)

• T: Thickness (mm)

• N= CN: With cover

• N= KN: Without cover

• N= ND: Cover only (no ladder body)

• LN= LN1: Joint-hole type 1 (see joint-hole types below)

• LN= LN2: Joint-hole type 2

• LN= LN3: Joint-hole type 3

• XXX= STD : Powder coating

• XXX= TTK : Pre-galvanized steel

• XXX= KNN : Hot-dip galvanizing

• XXX= INO : 304 stainless steel

• XXX= HKN : Aluminium alloy

Example: 

1. TC-200x100x1.2-CN-LN1-STD : Cable ladder 200mm(wide)x100mm(high)x1.2mm(thick) with cover, joint-hole type 1, powder coating.

2. TC-300x100x2-KN-LN2-KNN: Cable ladder 300mm(wide)x100mm(high)x2.0mm(thick) without cover, joint-hole type 2, hot-dip galvanizing

Fitting ordering code

Fitting code: TC-PK-WxHxTxR-N-LN-XXX

Where:

• PK= CN: Horizontal bend

• PK= CL: Riser bend

• PK= CX: Drop-out bend

• PK= TE: Tee

• PK= TH: Cross

• PK= GD: Symmetrical reducer

• PK= GT: Left-hand reducer

• PK= GP: Right-hand reducer

• W: Width (mm)

• H: Height (mm)

• T: Thickness (mm)

• R: Corner radius as required. Without parameter R, the angle follows The Sun’s default standard.

• N= CN: With cover

• N= KN: Without cover

• N= ND: Cover only (no ladder body)

• LN= LN1: Joint-hole type 1 (see joint-hole types above)

• LN= LN2: Joint-hole type 2

• LN= LN3: Joint-hole type 3

• XXX= STD : Powder coating

• XXX= TTK : Pre-galvanized steel

• XXX= KNN : Hot-dip galvanizing

• XXX= INO : 304 stainless steel

• XXX= HKN : Aluminium alloy

Information to provide for drawings and quotations

• W × H dimensions and straight-section length.
• Thickness, material and surface-treatment system.
• Bend radius, vertical-bend direction and quantity of each fitting.
• Cable load, support spacing and environmental conditions.
• Layout drawings, route diagrams or a bill of quantities, if available.

THE SUN JOINT STOCK COMPANY
Hotline/Zalo: 0903 988 018
Email: info@thesun.vn