The Sun powder-coated cable ladder is a cable-management solution for factories, buildings, data centres and indoor M&E systems. It is fabricated from sheet steel and finished with a uniform powder coating that makes cable routes easy to identify and gives the installation an attractive appearance.
Which projects are suitable for powder-coated cable ladders?
This product line is preferred for indoor, dry environments or locations where cable systems must be distinguished by colour. Common applications include factories, technical rooms, basements, shopping centres, office buildings, data centres and low-voltage systems.
- Advantages: attractive finish, a wide range of RAL colours, easy cleaning, reasonable cost and convenient custom production.
- Note: a standard coating should not be used for continuously exposed outdoor, coastal or aggressive chemical environments. For these locations, consider hot-dip galvanized cable ladder.
Common technical specifications
| Parameter | Production options |
|---|---|
| Width | 100–1000 mm |
| Height | 50–200 mm |
| Length | 2.5 m or 3 m per length; manufactured to order |
| Thickness | 1,0; 1,2; 1,5; 2,0; 2,5 mm |
| Base material | Fabricated sheet steel, surface-treated and powder-coated |
| Fittings | Horizontal bends, risers, drop-outs, tees, crosses, reducers, joints and support sets |
Dimensions and thickness must be selected according to cable quantity, total load, support spacing and operating conditions. The Sun can extract quantities from drawings and advise on specifications for each cable route.
Surface-finishing process
- Cut, punch and form components using CNC equipment.
- Weld cross members, clean and prepare the surface before coating.
- Apply an even powder coating to the product.
- Cure the coating in an oven and check colour, surface and dimensions.
- Pack to specification to minimise scratching during transport.
Powder-coating colours
The Sun manufactures to the project’s RAL colour chart. Common choices include grey, cream, black, orange, red, blue and green. Colours can coordinate with the architecture or identify power, control, data and fire-protection routes.
Coordinated fittings
A complete system comprises straight cable ladders, directional and branching fittings, reducers, splice plates and supports. Order the material, thickness and coating colour as a coordinated set for reliable assembly and appearance. See cable ladder drawings and fittings or send CAD drawings for quantity take-off.
Quick comparison of cable-ladder finishes
| Type | Preferred environment | Key characteristics |
|---|---|---|
| Powder coating | Indoor | Attractive, many colours, easy route identification |
| Pre-galvanized steel | Indoor, dry | Economical, quick delivery, no painting required |
| Hot-dip galvanizing | Outdoor, corrosive environments | Durable protection for harsh conditions |
Selection criteria powder-coated cable ladder
When selecting a powder-coated cable ladder, define the cable load, support spacing, RAL colour and installation conditions. The powder-coated cable ladder specification must coordinate with bends, tees, crosses, splice plates and support sets. Ordering powder-coated cable ladders to drawings reduces site variations and improves quantity control.
Powder-coated cable ladder quotation
Price is determined by width, height, steel thickness, length, coating colour, quantity and fittings. For an accurate quotation, provide W×H, thickness, length, RAL colour, quantity and delivery location.
Contact The Sun for advice and a quotation:
Order powder-coated cable ladders from The Sun
The Sun manufactures powder-coated cable ladders to project bills of quantities and drawings. Each batch of powder-coated cable ladders is checked against the specification before delivery; customers can order straight ladders and matching powder-coated cable-ladder fittings together.
Powder-coated cable ladders in projects
Coating thickness and inspection standard
Powder-coating thickness is determined by the technical requirements of each order or project documentation. The Sun checks dry-film thickness according to TCVN 9406:2012 – non-destructive method for determining dry-film coating thickness. This standard defines the measurement method; the accepted thickness value must be agreed in the quotation and technical documentation.
Reference price list for powder-coated cable ladders
Reference prices per metre, excluding VAT. The prices below exclude cable-ladder covers; covers and fittings are quoted separately by specification. These reference factory prices may change with material costs, quantity, drawings, colour requirements and coating thickness at the time of order. Contact us to confirm pricing, transport and lead time.
| Dimensions (Width × Height × Thickness) | Product code | Price (VND/m) |
|---|---|---|
| 100x50x1 | TC-100x50x1-KN-LN1-STD | 77,000 ₫ |
| 100x50x1.2 | TC-100x50x1.2-KN-LN1-STD | 86,000 ₫ |
| 200x50x1.2 | TC-200x50x1.2-KN-LN1-STD | 97,000 ₫ |
| 200x50x1.5 | TC-200x50x1.5-KN-LN1-STD | 111,000 ₫ |
| 200x100x1 | TC-200x100x1-KN-LN1-STD | 121,000 ₫ |
| 200x100x1.2 | TC-200x100x1.2-KN-LN1-STD | 134,000 ₫ |
| 200x100x1.5 | TC-200x100x1.5-KN-LN1-STD | 153,000 ₫ |
| 200x100x2 | TC-200x100x2-KN-LN1-STD | 185,000 ₫ |
| 250x100x1.2 | TC-250x100x1.2-KN-LN1-STD | 139,000 ₫ |
| 250x100x1.5 | TC-250x100x1.5-KN-LN1-STD | 160,000 ₫ |
| 250x100x2 | TC-250x100x2-KN-LN1-STD | 193,000 ₫ |
| 300x100x1.2 | TC-300x100x1.2-KN-LN1-STD | 145,000 ₫ |
| 300x100x1.5 | TC-300x100x1.5-KN-LN1-STD | 166,000 ₫ |
| 300x100x2 | TC-300x100x2-KN-LN1-STD | 201,000 ₫ |
| 400x100x1.2 | TC-400x100x1.2-KN-LN1-STD | 156,000 ₫ |
| 400x100x1.5 | TC-400x100x1.5-KN-LN1-STD | 179,000 ₫ |
| 400x100x2 | TC-400x100x2-KN-LN1-STD | 216,000 ₫ |
| 500x100x1.5 | TC-500x100x1.5-KN-LN1-STD | 192,000 ₫ |
| 500x100x2 | TC-500x100x2-KN-LN1-STD | 232,000 ₫ |
| 600x100x1.5 | TC-600x100x1.5-KN-LN1-STD | 204,000 ₫ |
| 600x100x2 | TC-600x100x2-KN-LN1-STD | 247,000 ₫ |
| 800x100x2 | TC-800x100x2-KN-LN1-STD | 278,000 ₫ |
| 1000x100x2 | TC-1000x100x2-KN-LN1-STD | 309,000 ₫ |
Note: the table lists common sizes only. The Sun manufactures other dimensions and thicknesses according to the technical documentation.
Frequently asked questions
Can a custom colour be selected?
Yes. The Sun manufactures to the RAL code agreed at order.
Can powder-coated cable ladders be used outdoors?
A standard coating is not recommended for locations exposed continuously to sun and rain. Hot-dip galvanizing is preferred for outdoor or corrosive areas.
What information is needed for a quotation?
Provide width × height, thickness, length, coating colour, quantity of straight ladders, fittings and delivery location.